Maintenance; Spare Parts - WAGNER W 575 FLEXIO Operating Instructions Manual

AUS

18. Maintenance

Air filter
WARNING! Never operate the machine without the air filter;
dirt could be sucked in and interfere with the function of the
machine. Check the air filter after each use for contaminants.
Disconnect plug before changing parts.
1) Press both locks (Fig. 17, 1) and remove the filter cover.
2) Remove the air filter (2) and replace depending on contamination.
3) Click the filter cover in place again.
Ventilating hose / Valve
1) Pull the ventilating hose (Fig. 12, 1) at the top from the gun body. Screw off the valve
cover (2). Remove the diaphragm (3). Carefully clean all parts or replace in the
event of damage.
2) Place the diaphragm (Fig. 12, 3) with the pin facing upwards on the bottom section
of the valve. Also see the marking on the gun body.
3) Place on the valve cover (Fig. 12, 2) and screw it closed.
4) Place the ventilating hose (Fig. 12, 1) on the valve cover and on the nipple at the gun
body.

19. Spare Parts

Spare Parts List Wall Extra I-Spray spray attachment (Fig. 18)
Pos. Designation
Wall Extra I-Spray spray attachment complete with 1300 ml
container
1 Air cap
2 Union nut and nozzle
3 O-ring of spray attachment
4 Ventilating hose, valve cover, diaphragm
5 Suction tube
6 Container seal
7 Container with cover 1300 ml (only for Wall Extra I-Spray spray
attachment)
Pos. Designation
1 Air filter cover
2 Air filter set
3 Stirring rod
Lubricating grease (no fig.)
20
Spare Parts List W 575 (Fig. 19)
W 575 Flexio
Order No.
2361 746
2382 753
2382 751
2362 875
2382 754
2389 021
2389 023
2305 155
Order No.
2397 458
2397 460
2304 419
2315 539