Safety Instructions For Spray Guns - WAGNER W 575 FLEXIO Operating Instructions Manual

W 575 Flexio
5. Service
a) Only have your power tool repaired by a qualified specialist and only use
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.

3. Safety Instructions for Spray Guns

•
Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to
health. Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear working clothing,
safety glasses, ear protection and gloves.
CAUTION: DANGER OF INJURY!
Never point the spray stream towards human beings or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Attention! Never operate the device if the nozzle seal is either
damaged or missing. If the nozzle seal is either missing or damaged
liquids can enter the device and increase the risk of an electric shock.
Check the nozzle seal before each use and tighten the union nut.
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
When working with the W 575 indoors as well as outdoors ensure that no solvent
vapors are sucked in by the spray gun.
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
AUS
13