Operation Mode; Gets Two Lan Ethernet Port For H820Qo - E-Lins H820QO Series User Manual

3.6.1 Operation Mode

Operation mode

 Bridge: All Ethernet and wireless interfaces are bridged into a single bridge interface.
 Gateway: The first Ethernet port is treated as WAN port. The other Ethernet ports and
the wireless interface are bridged together and are treated as LAN ports.
 AP Client: The wireless apcli interface is treated as WAN port and the wireless AP
interface and the Ethernet ports are LAN ports.
NAT Enabled

Network Address Translation. Default is
Ethernet wan port role:

Wired-WAN port acts as WAN
The Ethernet wan port is used as for WAN. Default is
Wired-WAN port acts as LAN
The Ethernet wan port is used as for lan port to get 2 LAN Ethernet ports. If is WAN RJ45
Ethernet port is used for WAN, please do not check this feature.
Normally and default we select

3.6.1.1 Gets two LAN Ethernet Port for H820QO

Check the Wired-WAN port acts as
Notes:
1) If checked the
port.
2) Please do not use any features for WAN RJ45 if check the
LAN
Gateway
LAN.
Wired-WAN port acts as
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
Enabling
Checked
mode, and keep all other parameters as default.
LAN, the H820QO does not have WAN RJ45
H820QO User Manual
Wired-WAN port acts as
www.e-lins.com