3.5.5 GPS
Enable: please check it once you need use GPS feature.
Only GPRMC: if check it, only send GPRMC data info (Longitude Latitude altitude)
Prefix SN No.: if check it, add the router SN to the data packet
Send interval: configure the frequency time of updated GPS data packet sending
GPS Send to: Choose
not process it. It will just send the received GPS signal to your GPS processor devices or
servers.
If the GPS processor device is connected to the H820QO Router via Serial Port, please choose
Serial.
If the GPS processor device is a remote server, please choose Serial.
GPS to TCP/UDP Settings
Server IP: fill in the correct destination server IP or domain name
Server port: fill in the correct destination server port
Serial
or
TCP/IP
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
method. The router only receives the GPS signal, will
H820QO User Manual
www.e-lins.com