E-Lins H820QO Series User Manual page 71

 Bring up on boot: if checked, LAN interface will be set to up when system bootup. If unchecked,
LAN interface will be down. Don't set it to unchecked if don't have special purpose.
 Use builtin IPv6-management: the default is checked. If IPv6 is not needed, it can be set to
unchecked.
 Override MAC address: override LAN MAC address.
 Override MTU: Maximum Transmission Unit.
 Use gateway metric: the LAN subnet's metric to gateway.
 Bridge interfaces: LAN bridges wired-LAN and WiFi in a same LAN subnet.
 Enable STP: enable Spanning Tree Protocol on LAN. The default value is unchecked.
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
H820QO User Manual
www.e-lins.com