Separation
HYDRAULIC CYLINDER CASE
FROM DIFFERENTIAL HOUSING
REMOVAL
Remove hydraulic cylinder case from differential housing,
1. Remove seat for convenience of future works.
2.
Remove pressure line from hydraulic cylinder h a d .
3.
Remove three cap screws and seven nuts of hydraulic cylinder
casetodifferential housing.
4. Remove hydraulic lift assembly with chain hoist
5.
Place the assembly on clean stand.
INSTALLATION
Reverse the removal step on the preceding page.
1.
Replace the gasket.
2.
Tighten hydraulic cylinder case-to-differential housing cap
screws and nuts t o
60
Nm (6 kgm)
(43
ft-lbs).
,--.
A
CAUTION:
Reinstall ROPS and seat belt if removed.