Yanmar YM276 Service Manual page 396

12. Measure side play with feeler gauge. Install a s many spacersas
required to provide less than 0.04 in
(1
mm).
13. Connect brake rods, clutch pedal rod and returm springs.
14. Install parking brake. Tighten retaining screw to 19 to 50 Nm
(5 kgm) (40 ft-lbs).
A
-
' 1 " T y p Snap Rino
B
-
Pedal Shaft
C
-
Falor Gwp.
ADJUSTMENT
1. Loosen lock nuts on each brake rod to unlock turnbuckle
(A).
2.
Depress each brake pedal individually to measure free travel of
pedals before engagement.
3.
Maximum free travel is 50 mm (1.969 in.). Adjust so pedals are
matched to 25 mm (0.984 in.) free travel.
4. Depress brake pedals and engage parking brake. Check opera-
tion of lever for proper engagement and disengagement.