Yanmar YM276 Service Manual page 19

Predelivery Service
10-05-7
- -
LUBRICANT
Before starting engine, make a few checks for lubricant level.
Tractor should be on a level surface when oil level i s checked.
If
it
is not, check only t o make sure the transmission case is
not dry. Recheck oil level later, when tractor i s on level
ground.
ACAUTION:
Store lubricants out of reach of children.
ENGINE OIL
1. Remove engine oil dipstick located on the right-hand side of
cylinder block.
2.
Check oil level.
The oil level should be between upper and
lower lines.
A
-
Upper
Indicator Line
B -Lowar Indicator Line
3.
If necessary, add enough o i l with the following specifications.
4. Depending upon the operating conditions, use the correct
grade of oil specified as shown.
Single-Vircority Oil Multi-Vireoritv Oil
CC or
CD
M I L MI L-L-2104C
M I L - L a 1 5 2
SMEZ76OI21S1705
YM276and2760
Kinomoro. Primed ;n Japan