Yanmar YM276 Service Manual page 553

LIGHTING AND ACCESSORY CIRCUITS
240-20-1
GENERAL INFORMATION
-
See Chapter
40.
Section
20
for lighting and accessory circuit
repair.
Refer to Figs. (section
05
page
5
and
6 )
for lighting and accessory
circuit wiring diagrams and component locations.
FUSES
All lighting circuits are protected by fuses located on lefthand
control console support. If all lights on one circuit fail at t h e same
time, a fuse may have blown.
DO NOT anempt to correct lighting arcuit problems by
inltalling a larger fuse, a s
it
may cause additional damage
to the circuit.
If a fuse blows, turn off the circuit. Remove fuse block cover and
pull out blown fuse. Install new fuse of equal amp capacity.
A
-
Indicator
Clunor
B
-
FlzshingNYarning Lights
C
-
Horn and Front PTO
D
-
Headlightr m d Work Light
Turn circuit on.
If fuse blows again, check carefully for a short
or ground in wiring.
HEADLIGHTS
SME276Dllld3M YMZ76 and 2760
Kinornoto. Printed in Japan