mabe EML27WWF0 Service Manual page 71

Range Locked or LOC
On appears in the oven
display or LC appears in
the surface display
Control signals after
entering cooking time or
start time
Display goes blank
Display flashes
Unable to get the display
to show "SF"
Power outage, clock
flashes
Steam from the vent
"Burning" or "oily" odor
emitting from the vent
Ingeniería de Servicio
The controls have been
locked.
You forgot to enter a bake
temperature or cleaning
time.
A fuse in your home may
be blown or the circuit
breaker tripped.
The clock is in the black-
out mode.
Power failure.
Oven control pads were
not touched properly.
Power outage or surge.
When using the ovens, it
is normal to see steam
coming out of the oven
vents. As the number of
racks or amount of food
being cooked increases,
the amount of visible
steam will increase.
This is normal in a new
oven and will disappear in
time.
71
See the Control Lockout section to
unlock.
Touch the BAKE pad and desired
temperature or the SELF CLEAN pad
and desired clean time.
Replace the fuse or reset the circuit
breaker.
See the Special features of your oven
control section.
Reset the clock.
The BROIL HI/LO and BAKE pads must
be touched at the same time and held
for 3 seconds.
Reset the clock. If the oven was in use,
you must reset it by touching the
CLEAR/OFF pad, setting the clock and
resetting any cooking function.
This is normal.
To speed the process, set a self-clean
cycle for a minimum of 3 hours. See the
Using the self-cleaning upper and lower
ovens section.