mabe EML27WWF0 Service Manual page 42

After a clean cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
You cannot set the oven for cooking or another self-clean cycle until the oven is cool enough for
the door to unlock.
While the oven is self-cleaning, you can touch the CLOCK pad to display the time of day. To
return to the clean countdown, touch the SELF CLEAN pad.
If the racks become hard to slide, apply a small amount of cooking oil to a paper towel and wipe
the edges of the oven racks with the paper towel..
Using Steam clean
CAUTION: During steam clean cycle the oven bottom becomes hot enough to cause burns. Wait
until the cycle is over (25 minutes) before wiping the inside surfaces of the oven, failure to do so
may result in burns.
The steam clean cycle makes it easier to clean light soiling off the porcelain oven interior.
The range should be at room temperature before beginning the steam clean cycle. If the oven is
too "hot" sill appear on the display and the cycle will not activate until the oven cools down.
The steam clean cycle performs best on new spills or soils. Burned- on food is more difficult to
remove.
Ingeniería de Servicio
42