mabe EML27WWF0 Service Manual page 68

Plastic melted to the
surface
Pitting (or indentation) of
the cooktop
Frequent cycling off and
on of surface units
Oven light does not work
Oven will not work
Food does not bake or
roast properly
Ingeniería de Servicio
Hot surface on a model
with a light-colored
cooktop.
Hot cooktop came into
contact with plastic placed
on the hot cooktop.
Hot sugar mixture spilled
on the cooktop.
Improper cookware being
used.
Light bulb is loose.
Plug on range is not
completely inserted in the
electrical outlet.
A fuse in your home may
be blown or the circuit
breaker tripped.
Oven controls improperly
set.
Oven too hot.
Oven controls improperly
set.
Improper rack position
being used.
Cookware not suited for
broiling.
68
This is normal. The surface may appear
discolored when it is hot. This is
temporary and will disappear as the
glass cools.
See the Glass surface potential for
permanent damage
Call a qualified technician for
replacement.
Use only flat cookware to minimize
cycling.
Tighten or replace the bulb.
Make sure electrical plug is plugged into
a live, properly grounded outlet.
Replace the fuse or reset the circuit
breaker.
See the Using the oven section.
Allow the oven to cool to below locking
temperature.
Make sure you touch the BROIL HI/LO
pad.
See the Broiling Guide.
For best results, use a pan designed for
broiling.