Anti-Tip Bracket Installation; Level The Range - mabe EML27WWF0 Service Manual

3. ANTITIP BRACKET INSTALLATION
To reduce the risk of tipping the range, the range must be secured by a properly installed anti-tip
bracket. See installation instructions included with the bracket for complete details before
attempting to install.
To check if the bracket is installed and engaged properly, remove the storage drawer or kick panel
and look underneath the range to see that the leveling leg is engaged in the bracket. On models
without a storage drawer or kick panel, carefully tip the range forward. The bracket should stop
the range within 4 inches.
Otherwise, the bracket must be reinstalled. If the range is pulled from the wall for any reason,
always repeat this procedure to verify the range is properly secured by the anti-tip bracket. Never
completely remove the leveling legs or the range will not be secured to the anti-tip device properly.

4. LEVEL THE RANGE

WARNING: Never completely remove the leveling leg as the range will not be secured to the anti
tip device properly.
A. Install all the oven racks in the oven an position the range where it will be installed.
B. Check for levelness by placing a spirit or a cup partially filled with water, on one of the oven
racks. Is using a spirit level, take two readings – with the level placed diagonally first in one
direction an then the other.
Ingeniería de Servicio
18