Reprogramming; Reprogramming Individual Drying Programmes (Changing The Standard Options); Example Of Reprogramming Pt 8303 Profitronic B Plus Residual Moisture Programme Machines - Miele PT 8301 SL Operating Instructions Manual

Reprogramming

Reprogramming individual drying
programmes
(Changing the Standard options)
Individual drying programmes can be altered to suit
specific requirements, practices and processes.
Before you begin, first ensure that:
– The dryer is switched off with the "On/Off" switch.
– The door is closed.
To access the programming level:
^ Press and hold the "START/STOP button and switch
the dryer on with the "On/Off" switch.
^ Hold the START/STOP button pressed in until the
light around the button stops flashing and lights up
constantly.
^ Release the START/STOP button.
– P will flash alternately with 1 in the segment display.
Programmable functions P 1- P 27 (see next page)
are selected by turning the rotary dial clockwise.
They can also be selected by pressing the Low
temperature additional option button K .
Programmable options, e.g. 0 or 1 are selected with
the START/STOP button.
The Low temperature additional option LED shows
which programmable function is currently
selected.
A short (quick) flash represents one unit, a long
(slow) flash represents ten units.
Example: The 5th Programmable function is
represented by the LED flashing five times quickly.
The 10th Programmable function is represented by
the LED flashing once slowly. Programmable
function 45 is represented by the LED flashing four
times slowly and five times quickly.
12
Example of reprogramming PT 8303 Profitronic B
Plus Residual moisture programme machines
P 2 to alter the buzzer which sounds at the end of
the programme (see "Programmable functions").
^ Turn the programme selection rotary dial one click
clockwise.
– The Low temperature option LED K will flash twice
quickly.
– P will flash alternately with 1 in the segment display.
Programmable option 0 = Off - 1 = On.
^ Pressing the START/STOP button will change the
option to 0.
To save the setting:
^ Switch the dryer off with the "On/Off" switch.