Installation; Mains Supply - ESAB A2 PEK Instruction Manual

4 INSTALLATION

4 INSTALLATION
The installation must be executed by a professional.
4.1

Mains supply

NOTE!
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains
supply, influence the power quality of the grid. Therefore connection restrictions
or requirements regarding the maximum permissible mains impedance or the
required minimum supply capacity at the interface point to the public grid may
apply for some types of equipment (see technical data). In this case it is the
responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment may be
connected.
0460 948 101 - 9 - © ESAB AB 2014