Introduction; Equipment; Control Panel - ESAB A2 PEK Instruction Manual

2 INTRODUCTION

2 INTRODUCTION
PEK is a control unit intended for submerged arc welding (SAW) and for gas metal arc
welding (GMAW). The control unit is used together with automatic welding machines, power
sources, column and booms.
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1

Equipment

The control unit is supplied with:
• An instruction manual for the control unit
• An instruction manual for the control panel in English
Instruction manuals in other languages can be downloaded from: www.esab.com.
2.2

Control panel

See the separate instruction manual for a detailed description of the control panel
0460 948 101 - 7 - © ESAB AB 2014