Technical Data - ESAB A2 PEK Instruction Manual

3 TECHNICAL DATA

3 TECHNICAL DATA
Supply voltage
Power requirement
Engine connections adapted for ESAB's
motors
Speed control
Operating temperature
Transportation temperature
Relative air humidity
Dimensions l×w×h
Weight
Enclosure class
Travel speed
Max manual travel speed
Wire feed speed, filler wire
*) The setting range is dependent on the product used.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
0460 948 101
PEK
42 V, 50/60 Hz
Max 900 VA
6 A 100%
Feedback from pulse encoder
-15°C to +45°C
-20°C to +55°C
Max 95%
246 × 235 × 273 mm
6.6 kg
IP23
0–200 cm/min *)
See separate instruction manual for
automatic welding machines.
2.0 m/min
0–2500 cm/min *)
See separate instruction manual for wire feed
unit.
- 8 - © ESAB AB 2014