Introduction; Equipment; Control Panel - ESAB A2 PEK Instruction Manual

GB
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary welding protection and accessories.
2

INTRODUCTION

PEK is a control unit intended for submerged arc welding (SAW) and for gas metal
arc welding (GMAW). The control unit is used together with automatic welding
machines, power sources, column and booms.
ESAB's accessories for the product can be found on page 15.
2.1

Equipment

The control unit is supplied with:
S
An instruction manual for the control unit
S
An instruction manual for the control panel in English
Instruction manuals in other languages can be downloaded from the website,
www.esab.com.
2.2

Control panel

be01d1ea
See the separate instruction manual for
a detailed description of the control
panel
- 6 -