Related Manuals for ESI Birdi
Summary of Contents for ESI Birdi
- Page 1 & operation instructions birdi ™ perching stool BIRDI-BLK BIRDI-GRY BIRDI-TPE evolution of motion BIRDI-NVY BIRDI PS Rev A 12/2017...
- Page 2 Please review these instructions before beginning the installation. Check that the four components shown below were provided with your order. No other parts are required. Do not discard the packaging until content that the product operates to your satisfaction.
- Page 3 • Only sit on the stool with both feet firmly on the floor. • Do not lean back; do not tip the stool past vertical in a backward direction. • Do not sit on the stool with only one foot or no feet on the floor.
- Page 4 2: attach gas cylinder to base • Push the large end of the cylinder into the base until it fits securely. You may need to rotate the cylinder slightly to align it. • Remove the plastic cap from the top of the cylinder.
- Page 5 3: attach seat to gas cylinder • Slide the collar and seat onto the top of the gas cylinder. Once aligned correctly, press down firmly on the seat. seat base Page 5...
- Page 6 4: sit on stool • Sit on the stool and bounce slightly to be sure all components are solidly connected and seated securely. height adjustment • To adjust the height of the stool, press either one of the two buttons located under the seat.
- Page 7 • Only sit on the stool with both feet firmly on the floor. • Rock, tip, or swivel the tool as desired, keeping in mind the following precautions: — Do not lean back; do not tip the stool past vertical in a backward direction.
- Page 8 LIMITED WARRANTY ESI warrants this product to be free from defects in manufacturing for a period of five years on the foam and cylinder, three years on fabric, and 15 years for all other components, in each case, from the date of original purchase. This warranty extends only to the original purchaser, and does not apply if the product has been damaged or fails to function properly as a result of misuse, abuse, modification, alteration, or improper cleaning or maintenance.
Need help?
Do you have a question about the Birdi and is the answer not in the manual?
Questions and answers