Table of Contents
Advertisement
Quick Links
ESPREE
PNEUMATIC TABLE BASE
2ESP Rev A 1/17
Assembly AND OPERATION
Model 2ESP-C48-ADJ-___
Model 2ESP-C60-ADJ-___
_ _ _ = SLV, BLK or WHT
Advertisement
Table of Contents
Related Manuals for ESI ESPREE
Summary of Contents for ESI ESPREE
- Page 1 ESPREE Model 2ESP-C48-ADJ-___ Model 2ESP-C60-ADJ-___ PNEUMATIC TABLE BASE _ _ _ = SLV, BLK or WHT 2ESP Rev A 1/17 ASSEMBLY AND OPERATION...
- Page 2 ESPREE PNEUMATIC TABLE BASE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly procedures. Check that all the parts shown below were provided with your order. Contact your supplier if any materials are missing. Do not discard the packaging until satisfied that the product operates to your satisfaction.
- Page 3 ASSEMBLY ESPREE PNEUMATIC TABLE BASE STEP 1 Lay the tabletop face down on a soft, clean Safety surface. Center the frame assembly with the release Safety Ring Column cable facing the front. STEP 2 Align Holes Raise the top table leg to the vertical position.
- Page 4 ESPREE PNEUMATIC TABLE BASE ASSEMBLY STEP 6 Repeat steps 2 through 5 for the other leg column. • Raise leg to the vertical position. • Loosely attach frame support bracket with four M8x14 screws (again, with the long side of the support bracket toward the front of the table).
- Page 5 ASSEMBLY ESPREE PNEUMATIC TABLE BASE STEP 8 M8x25 M8x15 Allen Key Allen Key Attach a foot to each of the legs. M8x15 Refer to the illustrations. Allen Key • The left side foot is attached with four M8x15 screws using the 6mm Allen key.
- Page 6 • If the table stays locked in one place or moves slowly, loosen the cable adjustment nut one-half turn and Cable recheck. Adjustment • Call ESI Customer Service if you have questions about operation or adjustment.
- Page 7 OPERATION ESPREE PNEUMATIC TABLE BASE OPERATION IMPORTANT: When adjusting the table, always make sure area is cleared of any obstructions or pinch points. • Pull the release lever toward you with one hand and using the opposite hand to raise or lower the table.
- Page 8 800.833.3746 esiergo.com © 2017 ESI Ergonomic Solutions. All rights reserved. 2ESP Rev A 1/17...
Need help?
Do you have a question about the ESPREE and is the answer not in the manual?
Questions and answers