Mira Moto Installation & User Manual page 11

6. Reversed Inlet Supplies Only:
a) Using a suitable tool, carefully remove the
plug cap from the centre of sealing plug
to reveal keyway.
b) Remove the sealing plug using the 'O' key
(supplied) or a 12 mm hexagonal key.
c) Unscrew the outlet nipple using the
'O' key (supplied) or a 12 mm hexagonal
key.
Note! On Mira Minilite Eco models
carefully remove the flow regulator from
the outlet nipple first.
d) Refit the sealing plug and outlet nipple in
the opposite outlets and tighten.
Note! Make sure that the 'O' seals are
correctly fitted.
Note! On Mira Minilite Eco models refit
the flow regulator.
e) Rotate the mixer 180°.
f) The control knob(s) will have to be
realigned, this can be completed in
section: 'Commissioning'.
Plug Cap
Sealing Plug
'O' Seal
7. Remove the backplate from the mixer by
loosening the grubscrew with a 2.5 mm
hexagonal key (supplied).
8. Secure the backplate to the wall using the
screws (supplied).
11
Backplate
Screw