Table of Contents
Advertisement
Rotating the
control knob
to position:
1
Hourmeter/Status
2
Voltage and
Frequency
3
Line 1 to neutral voltage and
Line 2 to neutral voltage
4
Engine temperature (F)
Oil pressure (psi)
5
Battery voltage
RPM
6
Next maintenance interval
7
Software version
8
ECM version
9
Contrast (lighting)
10
Event log
11
Fuel prime
Figure 2-4 Menu Items
Engine Start/Stop Button. The Engine Start/Stop
button toggles the running state of the engine. When the
controller is off, it has no effect. When the controller is in
a low-power mode, the Engine Start/Stop button starts
the engine.
Power Button. The Power button toggles the controller
between on and off. When the controller if off, it does not
respond to any input except the Power button.
TP-6591 10/13
Menu Item
LED Status Indicator. The LED provides a summary of
the generator state:
Green indicates no known problem
D
Red indicates one or more faults (i.e. the generator
D
cannot operate)
Amber indicates no faults but one or more warnings
D
(i.e. the generator can operate)
Slow blink indicates that the generator is not running
D
Steady indicates that the generator is running
D
Off indicates that the unit is off
D
Figure 2-5 shows the possible LED displays:
LED
Power
Status Indicator
Button
Off
Off
Slow blink green
On
Steady green
On
Slow blink red
On
Steady amber
On
Slow blink amber
On
Figure 2-5 Possible LED Status Indicator Displays
The controller is factory-set and should not require
configuration or adjustment under normal operating
conditions. If the generator set is reconnected to a
different voltage and/or frequency, refer to an authorized
Kohler distributor/dealer for system configuration and
adjustment instructions.
Engine
Condition
Stopped
Any
Stopped
No fault,
No warning
Running
No fault,
No warning
Stopped
Fault
Running
Warning
Stopped
Warning
Section 2 Operation
15
Hide quick links:
Advertisement
Table of Contents
