Rebooting Your Hearing Aid - Phonak Bolero M Series User Manual

14. Rebooting your hearing aid

Use this technique if your hearing aid is in an error state.
This will not remove or delete any program or settings.
1.
Press the lower part of the button for at least
15 seconds. It does not matter if the hearing aid is
switched on or off before you start pressing the button.
There is no light or acoustic notification at the end of the
15 seconds.
2.
Place the hearing aid in the power-connected charger
and wait until the indicator light blinks green. This can
take up to 30 seconds. The hearing aid is now ready to use.
35