Table of Contents
Advertisement
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGFX] [PEG]
Primary IGFX Boot Display [VBIOS Default]
Select the Vedio Device which will be activated during POST. Your selection
does not take effect if you have installed an external graphics device. Secondary
boot display selection will appear based on your selection. VGA modes can be
supported only on the primary display. Configuration options: [VBIOS Default]
[CRT] [DVI] [LVDS] [CRT2]
LVDS [Enabled]
Allows you to enable or disable LVDS (CH7511). Configuration options: [Disabled]
[Enabled]
LVDS Panel Type [1024x768 18Bit, 60Hz]
Allows you to configure LVDs panel used by Internal Graphics Device.
Configuration options: [640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600,
18bit, 60Hz] [1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit,
60Hz] [1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768, 24bit, 60Hz]
[1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]
[1920x1200, 48bit, 60Hz]
LVDS Backlight Level [80%]
Allows you to select the backlight brightness of LVDS. Configuration options:
[100%] [90%] [80%] ~ [0%]
LVDS Backlight Type [Normal]
Allows you to select the backlight control type of LVDS. Configuration options:
[Normal] [Inverted]
3.4.2
PCH-IO Configuration
Allows you to change the PCH parameters.
PCIe Mini Card [Enabled]
Allows you to enable or disable the PCIe Mini Card function. Configuration options:
[Enabled] [Disabled]
PCIe Mini Card Speed [Auto]
Allows you to select the PCIe Mini Card speed. Configuration options: [Auto]
[Gen1] [Gen2]
Azalia [Enabled]
Allows you to enable or disable the control detection of the Azalia device.
Configuration options: [Enabled] [Disabled]
EMB-H81A
3-10
Advertisement
Table of Contents
