Aaeon EMB-H81A Manual page 31

6. Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1, SATA3G_2)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical
drives via Serial ATA 3.0 Gb/s signal cables.
EMB-H81A SATA 3.0Gb/s connectors
NOTES:
• You must install Windows
Serial ATA hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.4 SATA Configuration for details.
9. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1, SATA6G_2)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-H81A SATA 6.0Gb/s connectors
NOTES:
• You must install Windows
Serial ATA hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
Chapter 2: Motherboard information
GND GND
RSATA_TXP3 RSATA_TXP4
RSATA_TXN3 RSATA_TXN4
GND GND
RSATA_RXN3 RSATA_RXN4
RSATA_RXP3 RSATA_RXP4
GND GND
XP Service Pack 3 or later version before using
®
GND GND
RSATA_TXP1 RSATA_TXP2
RSATA_TXN1 RSATA_TXN2
GND GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1 RSATA_RXP2
GND GND
XP Service Pack 3 or later version before using
®
2-23