Spare Parts; Ordering Data; Using Commercially Available Spare Parts; Ordering Spare Parts Via The Internet - Siemens SIMOTICS TN N-compact 1LH8 Operating Instructions & Installation Instructions

Spare parts

10.1

Ordering data

In addition to the exact part designation, please specify the machine type and serial number
in all orders for spare parts. Ensure that the spare part designation matches that on the spare
parts list and make sure you use the appropriate part number as well.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type
● Serial number
The machine type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft extension at the drive end.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
10.2

Using commercially available spare parts

You can use commercially available, standard components, but ensure that they have the
same construction type, dimensions, strength class etc.
10.3

Ordering spare parts via the Internet

You can use "Spares on Web" to determine the order numbers for motor spare parts quickly
and easily.
Spares on Web (https://www.automation.siemens.com/sow).
A short description of how to use "Spares on Web" is available on the Internet.
Guide for Spares on Web (http://support.automation.siemens.com/WW/news/en/25248626).
Rolling-contact bearings
When ordering roller bearings, in addition to the bearing identification code, the supplementary
specifying code is also necessary for the bearing version. Both of these codes are stamped
on the lubricant plate and specified in the motor documentation, or can also be taken from the
installed bearings.
SIMOTICS TN Series N-compact 1LH8
Operating Instructions 06/2017
10
113