System Requirements - Viessmann VITOCONNECT OPTO2 Installation And Operating Instructions Manual

Vitoconnect OPTO2 Installation and Operating
Vitoguide
(for contractors only)

System Requirements

Your heating system allows remote monitoring by your
contractor, once you have granted the required Service
clearance.
For further information go to:
www.viessmann.com/vitoguide or the App Store or
Google Play Store.
Supported control units
Current overview of the control units supported:
go to www.viessmann.com/vitoconnect.
IP network system requirements
Wi-Fi router with activated Wi-Fi. The Wi-Fi router
must be protected by a sufficiently secure WPA2
password. Unencrypted connections of the Vitoconnect
to the Wi-Fi router are discouraged.
Internet connection with "flatrate" (fixed charge with
unlimited time and data) with high availability, i.e.
the Vitoconnect is permanently connected to the
Viessmann server.
Network (Wi-Fi) with dynamic IP addressing (DHCP,
delivered condition); have an IT professional check
this before commissioning; set up if required.
Define the routing and security parameters for the IP
network (LAN): open port 80, port 123, port 443 and
port 8883 for directly outgoing connections. Have an
IT professional check this on-site before commissioning;
set up if required.
Note: During operation, Vitoconnect sets up a secure
Internet connection to the Viessmann server.
Connections of the Vitoconnect with other servers
are not possible.
User account
Regardless of the operating unit, the Vitoconnect
requires a valid user account for the Viessmann server.
This account is registered automatically at the time of
commissioning via the ViCare app: see page 18.
Operating unit for ViCare app
The ViCare app supports end devices running one of
the following operating systems:
Apple iOS
Google Android
Note:
Compatible versions: see the App Store or Google Play.
For more information go to www.vitodata.info.
Message destinations
End device for receiving email, for example computer,
smartphone or tablet PC.
Preparing for Installation
7