Restart The Vitoconnect; Resetting To Factory Settings - Viessmann VITOCONNECT OPTO2 Installation And Operating Instructions Manual
Communication interface for remote monitoring and remote control of heating systems over the internet, for the following user interfaces
Hide thumbs
Also See for VITOCONNECT OPTO2:
- Operating instructions manual (33 pages) ,
- Operating instructions manual (37 pages)
Table of Contents
Advertisement
Troubleshooting
Restarting the Vitoconnect
Resetting to Factory Settings
16
Operating button area
Operating button
Operating status LED
Communication LED
System function LED
Reset button
Vitoconnect OPTO2 Installation and Operating
After rectifying the fault, the Vitoconnect has to be
restarted.
Simultaneously press the Reset button and the operating
button for approx. 15 seconds:
LED
and
illuminated in green: The start-up phase
can last up to 2 minutes.
LED
illuminated in white: Vitoconnect is ready.
You can reset all changed values to their factory settings.
1. Press the Reset button (see above) for at least
30 seconds:
LED flashes red.
2. Press the Reset button (see above) once again
within 5 seconds.
LED no longer illuminated.
Vitoconnect restarts.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VITOCONNECT OPTO2 and is the answer not in the manual?
Questions and answers