82
Fig. 47: Assembling the control panel (2)
(6) - Screws
6.
Winkel (4) mit Schrauben (6) auf dem Armdeckel festschrau-
ben.
7.
Secure the bracket (4) to the arm cover using the screws (6).
8.
Position the arm cover (3) including control panel (5),but DO
NOT tighten yet.
Fig. 48: Assembling the control panel (3)
Class 171
(7) - Cable
9.
Lay the cable (7) behind the rear of the arm cover.
10. Guide the cable (7) down under the handwheel cover (3).
11. Feed the cable (7) through the tabletop cutout downwards to
the control.
12. Tighten the arm cover (3).
13. Assemble the handwheel cover (2).
⑥
⑦
Operating Instructions 171/173 - 02.0 - 09/2019
Setup
Class 173