38
Fig. 19: Setting the stitch condensing
①
(1) - Adjusting mark
To set the stitch condensing:
1.
Turn the stitch length adjusting wheel (2).
• increasing the stitch length: turn the stitch length adjus-
ting wheel (2) counterclockwise
• decreasing the stitch length: turn the stitch length
adjusting wheel (2) clockwise
The adjusting mark (1) indicates the selected stitch length.
(2) - Stitch length adjusting wheel
Operating Instructions 171/173 - 02.0 - 09/2019
Operation
②