DURKOPP ADLER 171 Operating Instructions Manual page 28

26
Fig. 8: Threading the looper thread (1)
(1) - Thread guide
To thread the looper thread:
1. Switch off the machine.
2. Fit the thread reel on the right plate of the reel stand (2).
3. Fit the thread in a wavelike manner through the holes of the
thread guide (1).
Important
The thread guide (1) must be parallel to the reel stand (2).
(2) - Reel stand
Operating Instructions 171/173 - 02.0 - 09/2019
Operation
①
②