Navigating To A Waypoint/Mark - Hema HN5 Quick Start Manual

7.6.4 Navigating to a Waypoint/Mark

To begin navigating to a waypoint/mark, bring up the tap-and-hold menu for the
selected waypoint and select the Goto Mark option.
Navigation windows will appear showing bearing and directional information to
the selected waypoint/mark. Your position is shown by the red cross-hair cursor.
The centre of the cursor flashes each time a new position is received (every
few seconds). If the cursor stops flashing and turns grey, the position is not up
to date. A track will be plotted, showing your progress towards the mark.
The guidance arrow indicates the direction to travel. Follow the arrow by bearing
right, if the arrow is pointing to the right or left, if it is pointing left until the arrow is
pointing straight up. The straight up arrow indicates that you are heading directly
towards the indicated waypoint.
83
M E M O R Y- M A P