Table of Contents
Advertisement
12
G E T T I N G S TA R T E D
3.3 Using the MicroSD Card Adaptor
A MicroSD card adaptor has been included with the Navigator so that it can be
used in conjunction with an SD card reader. To use the SD Card adaptor; gently
slide the MicroSD card into the slot provided in the end of the adaptor. The SD
card can now be used by devices with standard SDHC (Secure Digital High
Capacity) compliant SD card readers for use with your personal computer.
Note: Do not move lock tab to LOCK
3.4 Mounting the HEMA NAVIGATOR 5"
The HEMA NAVIGATOR 5" comes with a windscreen mount to ensure vibration-
free operation, stability and quality.
To mount the HEMA NAVIGATOR 5" on your vehicle's windscreen:
1. Attach the device cradle to the windscreen mount via the 4 pin system and
slide it down until it snaps/locks securely in place.
2. Select the desired location for your mount on the windscreen and ensure
the area is clean. Grip the base of the mount and place the suction cup
firmly against the windscreen. Whilst still firmly holding the mount, push
the lever on the base towards the windscreen to secure in place.
3. Adjust the cradle on the windscreen mount until the desired viewing angle
is achieved using the vertical and horizontal adjustment knobs.
4. Plug the USB connector of the car charger into the USB port located on
the left hand side of the Navigator.
5. Secure the HEMA NAVIGATOR 5" to the cradle on the windscreen mount
by aligning the base of the device with the tabs on the cradle. Snap the
top of the HN5" into the cradle.
6. Plug the car charger into the power outlet of the vehicle.
ADAPTOR
MicroSD CARD
MicroSD CARD
Advertisement
Table of Contents
