F Irst Assembly; I Nsert The Fins; I Nstall The Leash - Onean Carver X User Manual

03
F A
irst ssembly
3.1. i
nSert the FinS
1. Insert the fin inside the finbox as
shown in the picture.
2. Insert the metallic
in the finbox
it until it alignes the screw.
3. Fix the screw attaching the fin to the
board.
8
CARVER USER'S MANUAL
square
and move
3.2. i
nStaLL the LeaSh
Leash insert
1. Insert the screw through the insert and hold the leash.
2. Align the holes with the leash insert located on the left hand lower side of
the board on the non-slippery surface.
3. Screw the piece to secure it.
Leash screw
Screw
insert
Leash insert