Table of Contents
Advertisement
Battery
Compartment
3. Make sure the four pins are not visible and be aware of the
positioning while inserting it. Only one way is possible according to its
geometry.
4. Once the Battery is inserted in the board, insert
the four pins to lock the Battery. If the pins do
not enter easily, please, press down on the
battery so the watertight seal is sufficiently
compressed.
5. Close the vent completely, turning it clock wise to assure watertightness.
6. In order to ease the extraction of the batteries, turn the vent one full
round counte-clock wise. Pull from the upper handle perpendicularelly to
extract the batteries.
7. Keep
the
vent
always
and do not turn it more than three full turns.
Board
Connectors
closed
in
any
other
moment
Antenna´s LED
u
c
Se and
onFiguration oF the
CARVER USER'S MANUAL
04
e
quiPMent
11
Advertisement
Table of Contents
