B Attery Charge; A ) Connection - Onean Carver X User Manual

04
U C
se and onfigUration of the
4.1.3 b c
attery harge
DC Cable
Always connect the charger to the wall outlet first and then to the
battery.
It is extremely important to respect the colors when connecting
the cable to the battery. Reverse polarity could have some
devastating consequences for the battery.
Connector body
12
CARVER USER'S MANUAL
e
qUipment
Frontal View
AC Cable
!
WARNING!
Battery connectors
Charging indicator
) c
a onnection
1. In order to charge the battery it must be taken out from the board.
2. Insert the connector to the battery respecting the colors as shown in the
previous drawing (red with red and black with black).
3. When connecting the charger to the battery, The LEDs will
light up indicating a successful connection. In case of the
LEDs not lighting up, please make sure that the charger
is properly plugged to the wall outlet and to the battery.
4. Once the battery is
indicator will light
A) until fully charging it, turnining to green (img. B).
¨A¨Charging
Static Yellow light indicates
normal charging
5. The LEDs in the
up as the battery is being charged.
6. When the battery is fully charged the LEDs will turn off and
you must proceed to disconnect the battery.
connected, the display
up indicating the charge
"B" Full charge
Green LED lights up when battery is
fully charged
battery will progressively
LED
(img.
light