Safety Instructions - swissflex uni 14_75RF bridge basic Operating Instructions Manual

Health and comfort
Welcome to the world of Swissflex!
Your Swissflex uni 14_/22_/20_75RF basic is a Swiss
quality product. If you follow the simple operating and
safety instructions, it will function to your complete
satisfaction for many years. In addition to its many
other advantages, your uni 14_/22_/20_75RF basic
offers an undisturbed sleep environment. All electri-
cal connections between the mains plug and the bed
are virtually free of mains voltage (below 0.5 watts)
thanks to EcoTec.

Safety instructions

This device can be used by children
aged 8 and above and by people
with reduced physical, sensory or
mental capabilities or people lack-
ing experience and knowledge,
provided that they are supervised
or have been instructed in the safe
use of the device and understand
the dangers that may arise. Chil-
dren must not play with the device.
Cleaning and user maintenance
must not be carried out by children
without supervision.
CAUTION! The uni 14_/22_/20_75RF
basic and accessories must be pro-
tected from rain and other mois-
ture to prevent causing a fire haz-
ard or the risk of electric shock. In
case of spillages on an accessory,
the mains cable must be discon-
nected from the power outlet and
checked by your Swissflex stockist.
When installing the slat base, en-
sure that the head, back and foot
sections are not obstructed by fur-
niture.
EN
Ensure that the mains supply is
disconnected before any assembly
or disassembly work is carried out
on the slat base or the bed frame.
In the case of damage to cables
or to the switching power supply
housing, do not adjust the bed to a
seated position. Remove the mains
plug from the socket and inform
your stockist.
Handle the uni 14_/22_/20_75RF
basic and accessories with care; do
not disassemble or modify them,
do not allow children to play with
them and prevent frail individuals
from using the product without su-
pervision.
The product may not be used with
a medical device or be installed in
a medical device.
The product may not be used in an
environment in which flammable
or explosive gases or vapours (e.g.
anaesthetics) are likely to occur.
The product may not be used to
raise and lower loads.
Only use spare parts that have
been produced or approved by
Swissflex. Only these parts guar-
antee adequate safety.
The slat base may only be used
with the power supply provided.
Operating instructions
17