EdilKamin H2 Oceano 15 Installation, Use And Maintenance Manual page 7

TECHNICALAND HEATING SPECIFICATIONS
Thermal output (burnt)
Rated power
Water heating power
Approx. overall ef ciency
Approx. water ef ciency
Class ef ciency (EN 303-5)
ø female smoke outlet
Maximum operating pressure
Fuel consumption
Water capacity
Heating capacity *
Weight including packing
Hot sanitary water production (kit 1- 3 - N3 - N3bis)**
ø external air inlet
System return (male)
System ow (male)
N.B.: DATA PROJECT (Refer to standard EN 13229)
* The heatable room dimensions are calculated on the basis home insulation in compliance with Italian law 10/91, and subsequent
changes together with an expected heat output of 33 Kcal/m³ per hour.
* It is also important to consider the position of the boiler- replace in the room to be heated.
* * boiler temperature is 70° - (ðT=25K)
THE DIAMETER OF THE CHIMNEY FLUE TO BE USED MUST BE ASSESSED BY THE INSTALLER ACCOR-
DING TO THE HEIGHT OF THE CHIMNEY FLUE ITSELF.
THE INLET AND OUTLET PIPES MUST BE CROSSED FOR THIS TO FUNCTION PROPERLY
The data shown above is purely indicative.
EDILKAMIN s.p.a. reserves the right to change the products at its discretion without notice.
15-15/CS 23-23/CS
18,5
14,8
12,1
80
82
> 3
18
1,5
4,5
50
355
240
13-14
12,5
1"
1"
- 25
-
28-28/CS
27,8 34,8
22,2 27,8
18,2 22,8
80 80
82 82
> 3 > 3
22 25
1,5 1,5
7 8,5
100 130
535 670
285 325
13-14 13-14 litres/min
12,5 12,5
1" 1" inches
1" 1" inches
kW
kW
kW
%
%
-
cm
bar
kg/h
litres
m³
kg
cm