Channel Allocations For Ieee 802.11B/G; Serial Ports - Siemens RUGGEDCOM RS910W Installation Manual

Hide thumbs Also See for RUGGEDCOM RS910W:
Table of Contents

Advertisement

RUGGEDCOM RS910W
Installation Guide
Receiver Sensitivity
Section 4.3.3

Channel Allocations for IEEE 802.11b/g

The following details the channel identifiers, channel center frequencies and regulatory domains of each IEEE
802.11b/g 22-MHz-wide channel:
NOTE
Mexico is included in the Rest of World regulatory domain. However, channels 1 through 8 are for
indoor use only while channels 9 through 11 can be used indoors and outdoors. Users are responsible
for making sure the channel set configuration complies with the regulatory standards of Mexico.
Channel Identifier
1
2
3
4
5
6
7
8
9
10
11
12
13
a
14
a
Not supported in Japan for 802.11g mode.
Section 4.4

Serial Ports

The RUGGEDCOM RS910W supports DB9, RJ45 and ST (Straight Tip) fiber serial ports, all of which can be run in
RS232, RS485 or RS422 mode.
Channel Allocations for IEEE 802.11b/g
63 mW (18 dBm) 802.11g 48 Mbps Data Rate
40 mW (16 dBm) 802.11g 54 Mbps Data Rate
At Radio 802.11b 11 Mb @ -88 dBm/With Antenna: 11 Mb @ -91 dBm
At Radio 802.11g 54 Mb @ -74 dBm/With Antenna: 54 Mb @ -77 dBm
Frequency(MHz)
America (-A)
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
2462
2467
2472
2484
Regulatory Domains
EMEA (-E)
Communication Ports
Japan (-J)
Rest of World (-W)
Chapter 4
25

Advertisement

Table of Contents
loading

Table of Contents