Grizzly G0779 Owner's Manual page 32

G1049—Combination Rotary Table - 6"
Use this 6" Rotary Table for circular cutting, angle
setting, boring and spot facing. Table surface and
rotating parts are ground for smooth operation.
Table is a solid Meehanite casting offering stabil-
ity and assured accuracy. Ratio on all models is
90-to-1 or 4 degrees per hand-wheel revolution.
Figure 36. Model G1049 Combination Rotary
Table 6".
T26688—R-8 Quick Change Collet 8-Pc. Set
These collets are hardened and ground for maxi-
mum holding power and ultra precision. Threaded
fro ⁄ "-20 draw bars, this set has a maximum run-
7
16
out of 0.001". Set includes collect chuck,
⁄ ", ⁄ ", ⁄ ", ⁄ ", and 1" collets, spanner wrench,
3 1 5 3
8 2 8 4
and moulded plastic case.
Figure 37. T26688 R-8 Quick Change Collet
8 pc. Set
-30-
H2942—Magnetic Base w/Eye Shield 8" x 10"
H2943—Magnetic Base w/Eye Shield 12" x 16"
Need a shield? This is just the thing for setting up
extra protection. Powerful magnetic base allows
placing the shield just about anywhere and the
ball and socket joint allows a large range of posi-
tioning choices.
Figure 38. Magnetic base with eye shield.
⁄ ", ⁄ ",
1 5
4 16
Model G0779 (Mfd. Since 09/14)