H3C S3100-52P Operation Manual page 21

Operation Manual – Stack-Cluster
H3C S3100-52P Ethernet Switch
Enable NTDP on the
Ethernet port
V. Configuring NTDP-related parameters
Follow these steps to configure NTDP-related parameters:
Enter system view
Configure the range to
collect topology
information
Configure the device
forward delay of topology
collection requests
Configure the port forward
delay of topology
collection requests
Configure the interval to
collect topology
information periodically
Quit system view
Launch topology
information collection
manually
VI. Enabling the cluster function
Follow these steps to enable the cluster function:
Enter system view
Enable the cluster
function globally
To do...
ntdp enable
To do...
system-view
ntdp hop hop-value
ntdp timer hop-delay
time
ntdp timer port-delay
time
ntdp timer
interval-in-minutes
quit
ntdp explore
To do...
system-view
cluster enable
Use the command...
Use the command...
Use the command...
2-13
Chapter 2 Cluster
Remarks
Required
Enabled by default
Remarks
—
Optional
By default, the system
collects topology
information from the
devices within three hops.
Optional
By default, the device
forward delay is 200 ms.
Optional
By default, the port
forward delay is 20 ms.
Optional
By default, the topology
collection interval is one
minute.
—
Optional
Remarks
—
Required
By default, the cluster
function is enabled.