H3C S3100-52P Operation Manual page 23

Operation Manual – Stack-Cluster
H3C S3100-52P Ethernet Switch
Configure the IP address
range for the cluster
Start automatic cluster
establishment
Note:
After a cluster is established automatically, ACL 3998 and ACL 3999 will be
generated automatically.
After a cluster is established automatically, ACL 3998 and ACL 3999 can neither be
modified nor removed.
VIII. Configuring inside-outside interaction for a cluster
Follow these steps to configure inside-outside interaction for a cluster:
Enter system view
Enter cluster view
Configure a shared FTP
server for the cluster
Configure a shared TFTP
server for the cluster
Configure a shared
logging host for the cluster
Configure a shared SNMP
host for the cluster
To do...
ip-pool
administrator-ip-address
{ ip-mask |
ip-mask-length }
auto-build [ recover ]
To do...
system-view
cluster
ftp-server ip-address
tftp-server ip-address
logging-host ip-address
snmp-host ip-address
Use the command...
Use the command...
2-15
Chapter 2 Cluster
Remarks
Required
Required
Follow prompts to
establish a cluster.
Remarks
—
Required
Optional
By default, the
management device acts
as the shared FTP server.
Optional
By default, no shared
TFTP server is
configured.
Optional
By default, no shared
logging host is configured.
Optional
By default, no shared
SNMP host is configured.