H3C S3100-52P Operation Manual page 28

Operation Manual – Stack-Cluster
H3C S3100-52P Ethernet Switch
II. Configuring the enhanced cluster features
Complete the following tasks to configure the enhanced cluster feature:
Configuring cluster topology management function
Configuring cluster device blacklist
III. Configuring cluster topology management function
1) Configuration prerequisites
Before configuring the cluster topology management function, make sure that:
The basic cluster configuration is completed.
Devices in the cluster work normally.
2) Configuration procedure
Perform the following configuration on the management device.
Follow these steps to configure cluster topology management function:
Enter system view
Enter cluster view
Check the current
topology and save it as
the standard topology.
Save the standard
topology to the Flash
memory of the
administrative device
Restore the standard
topology from the Flash
memory of the
administrative device
Task
To do...
system-view
cluster
topology accept { all [ save-to
{ ftp-server | local-flash } ] |
mac-address mac-address |
member-id member-id |
administrator }
topology save-to local-flash
topology restore-from local-flash
Use the command...
2-20
Chapter 2 Cluster
Remarks
Required
Required
Remarks
—
—
Required
Required
Optional