Graco Sharpe Finex FX1000 Instructions-Parts List Manual page 3

TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on
skin, inhaled, or swallowed.
• Read MSDS's to know the specific hazards of the fluids you are using.
• Store hazardous fluid in approved containers, and dispose of it according to appli-
cable guidelines.
• Always wear impervious gloves when spraying or cleaning equipment.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in
the operating area of the equipment to help protect you from serious injury, including
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes
but is not limited to:
• Protective eyewear
• Clothing and respirator as recommended by the fluid and solvent manufacturer
• Gloves
• Hearing protection
Setup
Reference numbers and letters in paren-
theses in the text refer to numbers and
letters in the illustrations.
1. Install an air pressure regulator on gun air
supply line to control air pressure.
1
F . 1
IG
312372E
WARNING
2. Install a shutoff valve downstream of the air
3. Connect a clean, dry, filtered air supply to
4. Install fluid filter into fluid inlet.
5. Screw on gravity cup.
6. Remove gravity cup cover and fill cup with
7. After flushing, fill cup with fluid and attach
5
8-2
13
regulator to shut off gun air.
air inlet fitting (13). Connect other end to
shutoff valve.
solvent to flush if this is first time using
equipment. (See Flushing, page 5.)
cover.
Setup
3