Stp - H3C S3100-52P Command Manual

Command Manual – MSTP
H3C S3100-52P Ethernet Switches
Parameter
level: MSTP revision level to be set for the switch. This argument ranges from 0 to
65,535. By default, the MSTP revision level of a switch is 0.
Description
Use the revision-level command to set the MSTP revision level for a switch.
Use the undo revision-level command to restore the revision level to the default
value.
MSTP revision level, along with MST region name and VLAN mapping table,
determines the MST region which a switch belongs to.
Related
vlan-mapping modulo, and active region-configuration.
Example
# Set the MSTP revision level of the MST region to 5.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] stp region-configuration
[H3C-mst-region] revision-level 5

1.1.10 stp

Syntax
stp { enable | disable }
undo stp
View
System view, Ethernet port view
Parameter
enable: Enables MSTP globally or on the specified port(s).
disable: Disables MSTP globally or on the specified port(s).
Description
Use the stp command to enable/disable MSTP globally or on the specified port(s).
Use the undo stp command to restore the MSTP state to the default value globally or
on the port(s).
By default, MSTP is disabled on switches.
command: instance,
Chapter 1 MSTP Configuration Commands
region-name, check
1-10
region-configuration,