Stp Interface Point-To-Point - H3C S3100-52P Command Manual

Command Manual – MSTP
H3C S3100-52P Ethernet Switches
Note:
The rapid transition feature can be enabled on root ports or alternate ports only.
You can enable the rapid transition feature on the designated port, however, the
feature does not take effect on the port.
Example
# Enable the rapid transition feature on Ethernet1/0/1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C]stp interface Ethernet1/0/1 no-agreement-check

1.1.24 stp interface point-to-point

Syntax
stp interface interface-list point-to-point { force-true | force-false | auto }
undo stp interface interface-list point-to-point
View
System view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
force-true: Specifies that the links connected to the specified Ethernet ports are
point-to-point links.
force-false: Specifies that the links connected to the specified Ethernet ports are not
point-to-point links.
auto: Specifies to automatically determine whether or not the links connected to the
specified Ethernet ports are point-to-point links.
Description
Use the stp interface point-to-point command to specify whether the links connected
to the specified Ethernet ports are point-to-point links in system view.
Use the undo stp interface point-to-point command to restore the links connected to
the specified ports to their default link types, which are automatically determined by
MSTP.
Chapter 1 MSTP Configuration Commands
1-26