Region-Name - H3C S3100-52P Command Manual

Command Manual – MSTP
H3C S3100-52P Ethernet Switches
Note that a VLAN cannot be mapped to multiple spanning tree instances at the same
time. A VLAN-to-MSTI mapping is automatically removed if you map the VLAN to
another spanning tree instance.
Related command: region-name, revision-level, vlan-mapping modulo, check
region-configuration, and active region-configuration.
Example
# Map VLAN 2 to spanning tree instance 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] stp region-configuration
[H3C-mst-region] instance 1 vlan 2

1.1.7 region-name

Syntax
region-name name
undo region-name
View
MST region view
Parameter
name: MST region name to be set for the switch, a string of 1 to 32 characters.
Description
Use the region-name command to set an MST region name for a switch.
Use the undo region-name command to restore the MST region name to the default
value.
The default MST region name of a switch is its MAC address.
MST region name, along with VLAN mapping table and MSTP revision level,
determines the MST region which a switch belongs to.
Related
vlan-mapping modulo, and active region-configuration.
Example
# Set the MST region name of the switch to "hello".
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] stp region-configuration
command: instance,
Chapter 1 MSTP Configuration Commands
revision-level, check
1-8
region-configuration,