Table of Contents
Advertisement
Battery
Symbol
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
SPECIFICATIONS
1. Power tool
Model
Voltage
Speed
Air velocity
Air volume
Continuous operating time
Battery available for this tool*
Weight
[ ] indicates when in turbo mode
* Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
2. Battery
Model
Voltage
36 V / 18 V (Automatic Switching*)
Battery capacity
Available cordless
products**
Available charger
*
The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger
Model
Charging voltage
Weight
Meaning
Approximately 9.5 minutes (BSL36A18, when fully charged)
BSL36A18
2.5 Ah / 5.0 Ah
(Automatic Switching*)
Multi volt series, 18V product
Sliding charger for lithium ion
batteries
UC18YSL3
14.4 V – 18 V
0.6 kg
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
Disconnect the battery
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 15.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cleaning leaves from parks and gardens.
○ Cleaning up after pruning or mowing.
○ Cleaning up stadiums and grounds.
RB36DA
36 V
0 – 24000 /min (BSL36A18, when fully charged)
0 – 45 [53] m/s
0 – 680 [800] m
BSL36A18
3.5 kg (With BSL36A18 attached)
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
10
3
/h
Advertisement
Table of Contents
