Display Ip Routing-Table Ip-Address - H3C S3100-52P Command Manual

Command Manual – Routing Protocol
H3C S3100-52P Ethernet Switches
2.2.2.0/24
2.2.2.1/32
3.3.3.0/24
3.3.3.1/32
4.4.4.0/24
4.4.4.1/32
127.0.0.0/8
127.0.0.1/32
Table 1-1 Description on the fields of the display ip routing-table command
Destination/Mask
Protocol
Pre
Cost
Nexthop
Interface
1.1.2

display ip routing-table ip-address

Syntax
display ip routing-table ip-address [ mask ] [ longer-match ] [ verbose ]
View
Any view
Parameter
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask, length in dotted decimal notation or expressed as an integer. It
ranges from 0 to 32 when expressed as an integer.
longer-match: Specifies all the routes that lead to the destination address and match
the specified mask. If you do not specify the mask argument, those that match the
natural mask are specified.
verbose: With the verbose argument specified, this command displays the verbose
information of both the active and inactive routes. Without the argument specified, this
command only displays the summary of active routes.
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
Field
1-2
Chapter 1 IP Routing Table Display Commands
2.2.2.1
127.0.0.1
3.3.3.1
127.0.0.1
4.4.4.1
127.0.0.1
127.0.0.1
127.0.0.1 InLoopBack0
Description
Destination address/mask length
Routing protocol
Route preference
Route cost
Next hop address
Output interface, through which the data
packets destined for the destination
network segment are sent
Vlan-interface2
InLoopBack0
Vlan-interface3
InLoopBack0
Vlan-interface4
InLoopBack0
InLoopBack0