Display Ip Routing-Table Radix - H3C S3100-52P Command Manual

Command Manual – Routing Protocol
H3C S3100-52P Ethernet Switches
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask
20.1.1.1/32
127.0.0.0/8
127.0.0.1/32
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
210.0.0.1/32
# Display the static routing table.
<H3C> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
1.2.3.0/24
For detailed description of the output information, see Table 1-1.
1.1.5

display ip routing-table radix

Syntax
display ip routing-table radix
View
Any view
Parameter
None
Description
Use the display ip routing-table radix command to display the route information in a
tree structure.
Example
<H3C> display ip routing-table radix
Radix tree for INET (2) inodes 7 routes 5:
Protocol
DIRECT
DIRECT
DIRECT
Protocol
DIRECT
Protocol
STATIC 60
+-32+--{210.0.0.1
+--0+
Chapter 1 IP Routing Table Display Commands
Pre Cost Nexthop
0 0 127.0.0.1
0 0 127.0.0.1
0 0 127.0.0.1
Pre Cost Nexthop
0 0 127.0.0.1
Pre Cost Nexthop
0 1.2.4.5
1-6
Interface
InLoopBack0
InLoopBack0
InLoopBack0
Interface
InLoopBack0
Interface
Vlan-interface10